How To Remove Speed Limiter on Electric Scooter

Learning how to remove speed limiter on electric scooter can unlock your ride's true potential! Most scooters come with factory speed caps that hold back their real power.

Thankfully, you can boost your speed with a few simple tricks. Whether it's through secret dashboard codes, disconnecting specific wires, or accessing hidden controller settings, your scooter can go faster than the manufacturer intended.

Each brand has different methods, but the freedom of zooming at full speed is worth the effort. Read on to discover how to safely remove those annoying speed restrictions and experience the full thrill of your electric scooter!

Understanding Speed Limiters On Electric Scooters

Speed limiters are important safety features on electric scooters that control how fast you can go.

Before making any changes to them, you should know how they work and the reasons behind them.

How Limiters Work And Why They Exist

Speed limiters are small devices that restrict your electric scooter's top speed. They work by limiting the power that flows to the motor when you reach a certain speed.

Most manufacturers set these limits at about 15-20 mph depending on your scooter model.

Companies add these limiters for several reasons:

• Safety concerns: Faster speeds can lead to more accidents
• Legal requirements: Many cities have speed caps for electric scooters
• Battery preservation: Limiting speed helps your battery last longer
• Motor protection: Prevents overheating and damage to your scooter's motor

Speed limiters might be built into your scooter's controller, implemented through software, or installed as physical wires that can be disconnected.

Some fancy scooters use apps to control speed settings.

Safety And Legal Considerations Before Removal

Before you think about removing your speed limiter, you need to know about some important issues.

Legal stuff: In many places, electric scooters must stay under specific speed limits when used on public roads or sidewalks.

Going faster might be breaking the law!

Safety risks: Faster speeds mean:

• Longer stopping distances
• Less time to react to obstacles
• More serious injuries if you crash

Always wear proper safety gear including a helmet, knee pads, and elbow pads if you plan to ride faster. Your scooter's brakes and tires might not be designed for higher speeds.

Your insurance might not cover accidents if you've modified your scooter. Some modifications could also void your warranty or damage your scooter in ways that aren't obvious right away.

Protecting your faster ride becomes even more important. Be sure to read our guide Electric Scooter Insurance: What You Need to Know to understand how modifications affect your coverage options.

Method 1: Disconnecting The Speed Limiter Wire

One of the most straightforward ways to remove your electric scooter's speed limiter is by disconnecting the limiting wire. This method works on many popular models, including Dualtron scooters.

Locating The Limiter Wire By Scooter Model

Different scooter models place their limiter wires in various locations.

On most models, you'll need to check under the deck or near the controller box. Most limiter wires are designed to be easily identified. They often appear as a looped wire that may be a different color than surrounding wires.

Some manufacturers label them with a tag saying "speed" or "limit."

If you're unsure which wire is the limiter, check your scooter's manual or look online for diagrams specific to your model.

Don't disconnect wires randomly as this could damage your scooter!

Step-By-Step Disconnection Process

1. Turn off your scooter and disconnect the battery for safety reasons.
2. Open the deck or controller box using appropriate screwdrivers.
3. Identify the speed limiter wire - usually a looped wire that doesn't connect to any component.
4. Take a photo before disconnecting anything. This helps if you need to reverse the process.
5. Disconnect the wire by either cutting it or unplugging it from its connector.

Never cut multiple wires at once. Work carefully and slowly.

Some scooters have plug-and-play connections that can be unplugged rather than cut, which is safer and more reversible.

Securing Wires After Removal

After disconnecting the limiter wire, you need to properly secure everything. Don't leave cut wires hanging loose, as they could cause short circuits. Use electrical tape to wrap any exposed wire ends.

If you've unplugged a connection, secure the loose connector with zip ties or tape so it doesn't rattle around inside your scooter.

Consider installing an on/off switch to the limiter wire instead of permanently disconnecting it. This lets you toggle between limited and unlimited speeds for different situations.

Remember to put back all screws and panels exactly as they were. Test your scooter at slow speeds first to make sure everything works properly before trying higher speeds.

With your speed limiter removed, your electric scooter has become even more valuable and attractive to thieves. Learn the best security practices in our detailed article, How to Lock Electric Scooter & Prevent Theft to ensure your upgraded ride stays in your possession.

Method 2: Accessing Hidden Dashboard Settings

Many electric scooters have hidden dashboard settings that allow you to modify the speed limiter.

These settings aren't always obvious but can be accessed with the right button combinations or through special menus on your scooter's display.

Compatible Scooter Models For This Method

This method works best on scooters with digital displays. Look for scooters that have LCD screens with multiple menu options.

Not all scooters have these hidden settings, though. You can check if your scooter has this feature by:

• Reading your user manual for "advanced settings" or "P-settings"
• Searching online forums for your specific model
• Trying the button combinations described below

Some newer scooters like the Vsett series are known for having easily accessible P-settings that let you adjust speed limits without any extra tools.

Unlocking Speed Settings Through P-Settings

To access hidden P-settings on most scooters, try these steps:

1. Turn on your scooter and wait for the display to fully activate
2. Press and hold both power and mode buttons for 2-3 seconds
3. Use the mode button to cycle through P-settings until you find speed-related options (often P4, P8, or P15)

Speed limit settings are usually labeled clearly. Look for P8 which controls speed limits in most models. Once you find the right setting, use the up/down buttons to change the values.

Higher numbers mean faster top speeds. Be careful not to change other settings you don't understand.

Remember to save your changes before exiting!

On most scooters, you press and hold the power button or wait 5 seconds without pressing anything.

Method 3: Controller And Firmware Modifications

Making changes to your scooter's controller or installing custom firmware can unlock higher speeds by bypassing factory restrictions.

These modifications require some technical knowledge but can provide significant performance improvements.

Accessing Your Scooter's Controller

The controller is the brain of your electric scooter. It's usually located near the battery, under the deck or inside the stem.

To access it, you'll need to remove some screws or panels. Different models have different layouts, so check online guides for your specific scooter.

Be careful when opening your scooter! Unplug the battery first to avoid electrical shocks. Look for a small circuit board with wires connected to it - that's your controller.

Some controllers have visible settings you can adjust with small switches. Others need to be connected to a computer to make changes.

Take pictures before disconnecting anything so you remember how to put it back together.

Installing Custom Firmware For Higher Speeds

Custom firmware is special software that replaces the factory settings on your scooter. It can remove speed limits built into the original programming.

Many popular scooters have community-created firmware options. Tools like "ScooterHacking" or "M365 DownG" let you flash new firmware onto your device. These programs connect to your scooter through Bluetooth or a data cable.

Warning: Custom firmware might void your warranty! It can also put more strain on your motor and battery.

When choosing firmware, look for options that match your needs. Some focus on top speed while others improve acceleration or battery life.

Start with modest increases rather than the fastest possible setting.

Required Tools And Software

You'll need some basic tools to modify your controller:

• Screwdriver set (Phillips and flathead)
• Small hex wrenches
• Wire cutters/strippers
• Electrical tape
• Computer with Bluetooth capability

For software, download apps specific to your scooter model. Some modifications require a USB-to-serial adapter to connect your computer to the controller.

Forums like Reddit's r/ElectricScooters can help you find the right software for your specific model.

Always make a backup of your original firmware before making changes! This lets you restore factory settings if something goes wrong.

After increasing your scooter's speed capabilities, riding safely becomes even more crucial. Don't miss our essential Electric Scooter Safety Guide: Tips to Avoid Road Accidents for vital advice on handling your newly unleashed scooter responsibly.

After Removing Your Scooter's Speed Limiter

Once you've removed the speed limiter from your electric scooter, you'll notice several changes in how it performs. You should understand these changes to ride safely and maintain your scooter properly.

Expected Performance Changes

Your scooter will now go faster! Most riders see speed increases of 5-15 mph depending on your scooter model.

The acceleration will feel stronger too. Your speedometer might not show the correct speed anymore if it was connected to the limiter system.

Be ready for a different riding experience. The scooter might feel less stable at higher speeds. Turns will need more room and careful handling.

Remember that your brakes will need to work harder now. Test them at lower speeds first to get used to the new stopping distance.

Wear a helmet and protective gear! The risk of accidents increases with speed. Try riding in open areas with little traffic when you first test the faster speeds.

Battery And Component Impact At Higher Speeds

Your battery will drain much faster now. Higher speeds use more power, so expect 30-50% shorter range per charge.

Motors will run hotter since they're working harder. This might shorten their lifespan.

Check these parts more often after removing the limiter:

• Brake pads – they'll wear down faster
• Tires – look for uneven wear
• Motor – feel for unusual heat
• Battery – watch for quicker drain rates

Your scooter wasn't designed for constant high-speed use. Components like bearings and suspension will experience more stress.

Consider upgrading your battery if possible. A higher capacity battery can help maintain the range you had before.

Troubleshooting Common Post-Removal Issues

Error codes might appear on your display. The E7 error mentioned in search results is common after limiter removal.

Resetting your scooter often fixes this. If your scooter won't reach higher speeds, you might have missed disconnecting all limiter components. Some scooters have backup limiters.

Battery overheating? Try not to use maximum speed continuously. Give it breaks to cool down.

Strange noises from the motor could mean it's struggling with the new demands. Lower your speed and check for problems.

Controller issues are common too. If your scooter cuts out at high speeds, the controller might be overheating or have a built-in secondary limiter.

Most problems can be fixed by carefully checking all wiring connections or reinstalling the limiter if needed.

Conclusion

Removing your electric scooter's speed limiter gives you the freedom to ride at higher speeds, but always prioritize safety with proper gear and awareness of your surroundings. Remember that speed limits exist for good reasons, so consider using a switchable solution that lets you comply with local regulations when necessary.

Before making any modifications, check your warranty status and local laws regarding electric scooters. The methods we've shared work for most popular models, but results may vary depending on your specific scooter.

With your speed limiter removed, you'll enjoy the full potential of your electric scooter and experience rides like never before!

Ready for even more speed? Check out our high-speed electric scooter collection, and don't miss our comprehensive article How Fast Do Electric Scooters Go? Speed Ranges and Limits to understand what's possible with today's top models!

Frequently Asked Questions

Is it possible to identify and disconnect the speed limiting wire on different electric scooters?

Yes, many electric scooters have speed limiting wires that can be identified and disconnected. These wires are usually located near the controller box under the deck. The wire might be blue, white, or gray depending on your scooter model.

Some scooters use a single wire, while others have a loop wire that needs to be cut. Before making any changes, take photos of the original setup so you can restore it if needed.

How do I get the maximum speed on my electric scooter?

To achieve maximum speed on your electric scooter, ensure your battery is fully charged and tires are properly inflated to the recommended PSI. Switch to the highest speed mode available (often labeled "Sport" or "S") on your dashboard.

Consider adjusting P-settings if your model allows, but remember that removing speed limiters may void your warranty and could violate local regulations.

How do I deactivate the speed limiter?

Deactivating the speed limiter typically involves accessing your scooter's controller system by disconnecting the limiter wire found near the dashboard or inside the deck. Many models allow access to hidden P-settings through specific button combinations on the display panel.

Another option is installing custom firmware that bypasses speed restrictions, but this requires research for your specific scooter model and technical knowledge.

How do you adjust the speed limiter on a scooter?

Adjusting the speed limiter on most electric scooters can be done through the P-settings menu, accessed by pressing a specific combination of buttons on your dashboard.

Navigate to speed-related parameters (often P0 or similar) and modify the values to increase your maximum speed limit. Some scooters also offer companion smartphone apps that allow speed adjustments through a Bluetooth connection to your device.